Since light cannot penetrate opaque (solid) samples, it is reflected on the surface of the samples.
UV Accessory Selection Guide for Solids - Options
Related information
-
-
With relative specular reflectance measurement, the reflectance is calculated from the strength ratio after comparing the light reflected from the reference sample with the light reflected from the measurement sample.
-
With absolute specular reflectance measurement, as shown in the figure, a reference sample is not used, the sample-free state (air) is set at 100%, and the reflection of the sample is simply applied to the 100% setting when measuring the sample.
-
The transmittance of thin samples such as film with little scattering can be measured by combining the film holder with the standard sample compartment.
-
This large-sample compartment enables transmission and reflection measurements of various-shaped samples.
-
This unit uses a lens and mask to mask the beam that passes through the integrating sphere opening.
-
This software calculates the color values of the measured object from the spectra obtained by the spectrophotometer.
-
This software calculates film thickness from the peak positions of the interference pattern caused by the film.
-
The SolidSpec-3700i/3700i DUV have three detectors which cover the range from ultraviolet to near-infrared. This product is equipped with LabSolutions UV-Vis software.
-
The three detector, multi-purpose spectrophotometer with large-sample compartment and Integrating sphere enable the high-sensitivity measurement of solid samples. This product is equipped with LabSolutions UV-Vis software.
-
The compact UV-2600i (UV-2700i) is a mid-range UV spectrophotometer that can be used in a wide array of fields, and easily expanded to suit your analysis goals. The included Shimadzu LabSolutions UV-Vis software is simple to use and can ensure data integrity. The UV-2600i is a single monochromator system, whose wavelength range can easily be expanded to the near-infrared region of 1400 nm using the optional integrating sphere. The UV-2700i is a double monochromator system capable of 8-Abs measurements. It is optimal for measuring samples with low transmittance.
-
The UV-1900i is a double-beam UV-Vis Spectrophotometer using Shimadzu's original LO-RAY-LIGH™ diffraction grating technology.
This product is equipped with LabSolutions UV-Vis software.