LabSolutions CS
TMA-60 Series - Options
Thermomechanical Analyzer
Cooling furnace LTB-60(only for TMA-60 models)
Used with a TMA-60 model, this enables measurements at temperatures from -150 to 600 °C. Liquid nitrogen is used for measurements below room temperature.
Tension chuck for fiber
Used for tension measurement of samples in fiber form.
The FC-60A flow controller is used to control the flow rate of atmosphere gases (of two channels). Since the gas ON/OFF control is performed according to a temperature program, the atmosphere can be automatically changed during a measurement.
Specifications
| Primary pressure | 0.6MPa max. |
|---|---|
| Flow rate | PURGE side: 0~500ml/min (calibrated for N2) DRY side: 0~500ml/min (calibrated for N2) |
| Flow line | PURGE: 2 IN, 1 OUT DRY: 1 IN, 1 OUT |
| Size and weight | W 180 × D 200 × H 90mm, approx. 3kg |
| Power supply | 90~130V AC or 210~230 V AC, 100VA |
