MCT Series - Specs

Electromagnetic force

Type: Flat indenter (50 µm diameter)
(500 µm flat indenter as option)
Material: Diamond

Tester: Approx. W 355 × D 405 × H 530 mm Control unit: Approx. W 315 × D 375 × H 110 mm

80% max. (no condensation)

Horizontal vibration: 0.017 Gal max. (at 10 Hz or more)
0.01 µm max. (at less than 10 Hz)
Vertical vibration: 0.010 Gal max. (at 10 Hz or more)
0.005 µm max. (at less than 10 Hz)

Recommended temperature: 23 ± 1°C Allowable range: 10°C to 35°C

The grounding pins of 3-pin connectors must be connected to a resistance of 100 W or less.

Approx. 100 W (not including power consumption of PC)

Single phase AC 100–115 V ± 10%, AC 230 V ± 10% (Ground resistance 100 Ω max.)

Calculation of compressive strength, display of test parameters and results
Display of test force and displacement data
Display of test force/displacement curve
Display of test force/displacement identification value
Display of strength/particle diameter curve
Display of displacement/time curve
Display of strength/parameter curve

Particle, fiber or other shapes

Compression test, load-unload test, cyclic test

25 mm for both X and Y directions
Min. increment: 0.01 mm (0.001 mm with option)

Approx. W 125 mm × D 125 mm

Approx. 60 mm

SKS flat plate (Diamond pressure plate available as option)

0.01 µm / pulse

9.8 – 4903

Approx. × 100, × 500 (× 200, × 400, × 1000 with option)

Within ± 1% of displayed test force or 0.1 mN (whichever is greater)

5 (when testing at 49 mN or less)

Differential transformer

0 – 100

0.001

Within ± 2% of full scale

× 10, × 50 (× 20, × 40, × 100 with option)

Approx. 200 µm (with × 50 objective lens)

× 10

Epiluminescent

LED 3 W / 3 V

Switching between observation and photography possible

Direct connection between encorder and control handle: synchronized movement of two indexes

Optical encoder

Tester: Approx. 60 kg Control unit: Approx. 5 kg

Electromagnetic force

Type: Flat indenter (50 µm diameter)
(500 µm flat indenter as option)
Material: Diamond

Tester: Approx. W 355 × D 405 × H 530 mm Control unit: Approx. W 315 × D 375 × H 110 mm

80% max. (no condensation)

Horizontal vibration: 0.017 Gal max. (at 10 Hz or more)
0.01 µm max. (at less than 10 Hz)
Vertical vibration: 0.010 Gal max. (at 10 Hz or more)
0.005 µm max. (at less than 10 Hz)

Recommended temperature: 23 ± 1°C Allowable range: 10°C to 35°C

The grounding pins of 3-pin connectors must be connected to a resistance of 100 W or less.

Approx. 100 W (not including power consumption of PC)

Single phase AC 100–115 V ± 10%, AC 230 V ± 10% (Ground resistance 100 Ω max.)

Calculation of compressive strength, display of test parameters and results
Display of test force and displacement data
Display of test force/displacement curve
Display of test force/displacement identification value
Display of strength/particle diameter curve
Display of displacement/time curve
Display of strength/parameter curve

Particle, fiber or other shapes

Compression test, load-unload test, cyclic test

25 mm for both X and Y directions
Min. increment: 0.01 mm (0.001 mm with option)

Approx. W 125 mm × D 125 mm

Approx. 60 mm

SKS flat plate (Diamond pressure plate available as option)

0.01 µm / pulse

9.8 – 4903

Approx. × 100, × 500 (× 200, × 400, × 1000 with option)

Within ± 1% of displayed test force or 0.1 mN (whichever is greater)

5 (when testing at 49 mN or less)

Differential transformer

0 – 10

0.0001

Within ± 2% of full scale

× 10, × 50 (× 20, × 40, × 100 with option)

Approx. 200 µm (with × 50 objective lens)

× 10

Epiluminescent

LED 3 W / 3 V

Switching between observation and photography possible

Direct connection between encorder and control handle: synchronized movement of two indexes

Optical encoder

Tester: Approx. 60 kg Control unit: Approx. 5 kg

Electromagnetic force

Type: Flat indenter (50 µm diameter)
(500 µm flat indenter as option)
Material: Diamond

Tester: Approx. W 355 × D 405 × H 530 mm Control unit: Approx. W 315 × D 375 × H 110 mm

80% max. (no condensation)

Horizontal vibration: 0.017 Gal max. (at 10 Hz or more)
0.01 µm max. (at less than 10 Hz)
Vertical vibration: 0.010 Gal max. (at 10 Hz or more)
0.005 µm max. (at less than 10 Hz)

Recommended temperature: 23 ± 1°C Allowable range: 10°C to 35°C

The grounding pins of 3-pin connectors must be connected to a resistance of 100 W or less.

Approx. 100 W (not including power consumption of PC)

Single phase AC 100–115 V ± 10%, AC 230 V ± 10% (Ground resistance 100 Ω max.)

Calculation of compressive strength, display of test parameters and results
Display of test force and displacement data
Display of test force/displacement curve
Display of test force/displacement identification value
Display of strength/particle diameter curve
Display of displacement/time curve
Display of strength/parameter curve

Particle, fiber or other shapes

Compression test, load-unload test, cyclic test

25 mm for both X and Y directions
Min. increment: 0.01 mm (0.001 mm with option)

Approx. W 125 mm × D 125 mm

Approx. 60 mm

SKS flat plate (Diamond pressure plate available as option)

0.01 µm / pulse

9.8 – 1961

Approx. × 100, × 500 (× 200, × 400, × 1000 with option)

Within ± 1% of displayed test force or 0.1 mN (whichever is greater)

2 (when testing at 19 mN or less)

Differential transformer

0 – 100

0.001

Within ± 2% of full scale

× 10, × 50 (× 20, × 40, × 100 with option)

Approx. 200 µm (with × 50 objective lens)

× 10

Epiluminescent

LED 3 W / 3 V

Switching between observation and photography possible

Direct connection between encorder and control handle: synchronized movement of two indexes

Optical encoder

Tester: Approx. 60 kg Control unit: Approx. 5 kg

Electromagnetic force

Type: Flat indenter (50 µm diameter)
(500 µm flat indenter as option)
Material: Diamond

Tester: Approx. W 355 × D 405 × H 530 mm Control unit: Approx. W 315 × D 375 × H 110 mm

80% max. (no condensation)

Horizontal vibration: 0.017 Gal max. (at 10 Hz or more)
0.01 µm max. (at less than 10 Hz)
Vertical vibration: 0.010 Gal max. (at 10 Hz or more)
0.005 µm max. (at less than 10 Hz)

Recommended temperature: 23 ± 1°C Allowable range: 10°C to 35°C

The grounding pins of 3-pin connectors must be connected to a resistance of 100 W or less.

Approx. 100 W (not including power consumption of PC)

Single phase AC 100–115 V ± 10%, AC 230 V ± 10% (Ground resistance 100 Ω max.)

Calculation of compressive strength, display of test parameters and results
Display of test force and displacement data
Display of test force/displacement curve
Display of test force/displacement identification value
Display of strength/particle diameter curve
Display of displacement/time curve
Display of strength/parameter curve

Particle, fiber or other shapes

Compression test, load-unload test, cyclic test

25 mm for both X and Y directions
Min. increment: 0.01 mm (0.001 mm with option)

Approx. W 125 mm × D 125 mm

Approx. 60 mm

SKS flat plate (Diamond pressure plate available as option)

0.01 µm / pulse

9.8 – 1961

Approx. × 100, × 500 (× 200, × 400, × 1000 with option)

Within ± 1% of displayed test force or 0.1 mN (whichever is greater)

2 (when testing at 19 mN or less)

Differential transformer

0 – 10

0.0001

Within ± 2% of full scale

× 10, × 50 (× 20, × 40, × 100 with option)

Approx. 200 µm (with × 50 objective lens)

× 10

Epiluminescent

LED 3 W / 3 V

Switching between observation and photography possible

Direct connection between encorder and control handle: synchronized movement of two indexes

Optical encoder

Tester: Approx. 60 kg Control unit: Approx. 5 kg

Windows 7 (32/64 bit edition)

1 GHz min.

CD-ROM drive

1024 × 768 min.

PCI Express ×1, 2 slots min.